screen printing supplies | equipment | advice

0

Your Cart is Empty

International Coatings 158 Copper Shimmer

Size

International Coatings 158 Copper Shimmer

Access the International Coatings Color Chart Here

  • International Coatings Shimmer Plastisols are press ready.
  • They provide a bright, non-tarnishing metallic sparkle to printed garments.
  • The inks consist of a fine, shimmering glitter flake in a low bleed, low fusion, easy to print base.

RECOMMENDED FABRICS

Cotton polyester and some cotton/polyester blends. Always test print fabric before beginning a production run.

INK APPLICATION

156LF, 157LF & 158LF METALLIC SHIMMERS should be printed onto garment right from the container without any modifications. Thinning this product may reduce the metallic sparkle. If modification is necessary use the following reducers:

DARK GARMENTS:Use 1099LF Low Bleed Curable Reducer (Add 1% to 10% by Volume).

LIGHT GARMENTS:Use 1110LF Curable or 1099LF Low Bleed Curable Reducer (Add 1% to 10% by Volume

SCREEN MESH

86 - 160 t/in or 24 - 63 t/cm Monofilament

SQUEEGEE

60-70 Durometer: Sharp edge for light colored fabrics and beveled or sharp edge for dark fabrics.

CURE TEMPERATURE

325°F (163°C) entire ink film. Test dryer temperatures before a production run. Wash test printed product before beginning production run.

CLEAN-UP

Mineral spirits or any environmentally friendly plastisol screen wash.

STORAGE OF INK   

Recommend storage at 65°F to 90°F (18°C to 32°C). Avoid storage in CONTAINERS   direct sunlight and moist, humid air.
Tech Sheet Safety Sheet