Sold Out
7031 Ultra White is a high performance, High Pigment white, Non-Phthalate plastisol screen printing ink for high speed printing. 7031 White is very creamy, short bodied, low tack, and very opaque, resulting in excellent coverage on dark garments. Formulated for high definition and resolution, fine detail and halftone printing.
RECOMMENDED FABRICS
100% cotton, and some cotton/polyester blends. Always test print fabric before beginning a production run.
INK APPLICATION
7031 Ultra White should be used right from the container without any modifications. If thinning is required, use 1% to 5% by weight of 1099 Lo-Bleed Curable Reducer. Adding any reducers or additives can lower the bleed resistance, opacity, or increase cure times of ink. STIR the ink prior to printing on press and after addition of reducers or additives.
SCREEN MESH AND EMULSION
Use 60-305 t/in or 24-120 t/cm monofilament. Use 110-305 t/in or 43-120 t/cm monofilament for under basing. Any direct or indirect emulsion or capillary film in the 35 to 70 micron range, for best results.
SQUEEGEE
65-70 Durometer: Sharp Edge.
CURE TEMPERATURES
325°F (163°C) entire ink film. Test dryer temperatures and wash test printed product before and during a production run.
CLEAN-UP
Any environmentally friendly plastisol screen wash.
STORAGE OF INK CONTAINERS
Recommend storage at 65°F to 90°F (18°C to 32°C). Avoid storage in direct sunlight. Keep containers well sealed.
Tech Sheet Safety Sheet