screen printing supplies | equipment | advice


Your Cart is Empty

International Coatings 7123 Lemon Yellow

Notify me when this product is available:


International Coatings 7123 Lemon Yellow

IC's 7100 Performance Pro Series Plastisol Inks is a low fusing, fast flashing, low tack, plastisol based screen printing ink system. Designed specifically for use on performance fabrics, 100% polyester and polyester stretchable blends.

IC Performance Pro Series inks have high bleed resistance and stretch properties.

7100 Performance Pro™ Series is a low fusing (low curing) plastisol.

Recommended minimum cure temperature is 275°F (135°C).

It is important to ensure that the ink is completely cured/fused before beginning production. Although a minimum of 1 minute is recommended, the time required for the ink to fuse completely will vary depending on the type of dryer used. The use of additives such as stretch or reducers with 7100 series may inhibit the low bleed and/or low fusing characteristics of this product.

Always test print the fabric to be used before beginning production to see if the desired performance is obtained. Wait at least 24 hours, longer if possible , before determining dye migration and bleed resistance. Test dryer temperatures and wash test printed product before and during a production run.

7100 Performance Pro inks are low cure (275F) and as such should be stored in the coolest area of your shop. Any unused 7100 Series inks should be returned to the bucket and the bucket should be sealed.


 Tech Sheet

Safety Sheet