screen printing supplies | equipment | advice

0

Your Cart is Empty

International Coatings 771 HP White

Notify me when this product is available:

Size

International Coatings 771 HP White

International Coatings 771LF and 774LF whites are low fusing, fast flashing, high pigment (HP), low bleed (LB) plastisol inks.

RECOMMENDED FABRICS
100% Cotton polyester and cotton/polyester blends. Always test print fabric before beginning a production run.
INK APPLICATION
771LF and 774LF Whites should be printed right from the container without any modifications. For optimum performance, the thinning or reducing of these inks is not recommended.
SCREEN MESH
86 to 305 t/in or 34-120 t/cm Monofilament
Use 110-230 t/in or 43-90 t/cm Monofilament for under basing 
Any direct or indirect lacquer resistant emulsion. Use 35 to 70 micron capillary film for best results.
SQUEEGEE
50-70 Durometer: Sharp edge for light colored fabrics and beveled or sharp edge for dark fabrics.
CURE TEMPERATURE
275°F to 300°F (135°C to 149°C). For 1 color prints only.
325°F (163°C). For multiple color prints where all colors are not low fusing.
Test dryer temperatures before a production run. Wash test printed product before beginning production run.
CLEAN-UP
Mineral spirits or any environmentally friendly plastisol screen wash.
STORAGE OF INK   
Recommend storage at 65°F to 90°F (18°C to 32°C). Avoid storage in CONTAINERS    direct sunlight and moist, humid air.

Tech Sheet  Safety Sheet