LittleRed X-3D Conveyor Dryer - 30" Belt
The LittleRed X3D Series has a dual zone heat control, with a boost zone to quickly reach temperature required.
Great conveyor dryer for direct-to-garment, plastisol, water-based, and discharge inks.
360+ Shirts/hr plastisol
130+ Shirts/hr water-based/discharge
51+ Shirts/hr DTG/digital white ink @ 3 min>
Electric: 240V, 1 Phase, 8900 Watts, 38 Amps
Production: 360+ Shirts/Hour* (Plastisol)
130+ Shirts/Hour* (Waterbased/Discharge)
51+ Shirts/Hour* (DTG/digital white ink @ 3min)
38 + Shirts/Hour* (DTG/digital white ink @ 4min)
Belt Width: 30"
Overall Dimensions: (L x W x H) 88" x 41" x 50"
Chamber Length: 41"
Chamber In-Feed Width: 33.5"
Chamber In-Feed Height: 2" - 7" (adjustable)
Heater Dimensions: (3) 12" x 24"
"X-Series" Conveyor Belt Tracking System with 30" wide PTFE coated belt
Infrared Focusing System: 2" - 7" belt-to-heater clearance, adjustable separately on each side for each heater
- DC belt speed control
- 3 Year Defect Warranty
- 15 Year Heater Warranty
Additional Chamber (3) 2600W / 240V heaters
Belt Extensions (18" or 36")
Wheel set with locking casters for easy mobility
What is the Infrared Focusing System?
- Infrared emitters have an optimal distance at which they operate most efficiently.
- If the emitter is too far away energy is wasted and lost in the distance.
- If the emitter is too close the substrate may come in contact with the emitter surface.
- Adjusting the heater height is an absolute necessity if the products that you print vary in height.
- Maintain an approximate distance of 2 1/2" from heater surface to ink.
Ships from Bethlehem, Pa. 18015 USA
Please allow 10 - 12 business days for production
Crating Fee - $399