Still open, still shipping orders through covid19. . .Stay safe and Print on!


Your Cart is Empty

LittleRed X-3D Conveyor Dryer - 54" Belt

LittleRed X-3D Conveyor Dryer - 54" Belt

The LittleRed X3D Series has a dual zone heat control, with a boost zone to quickly reach temperature required.

Great conveyor dryer for direct-to-garment, plastisol, water-based, and discharge inks.

360+ Shirts/hr plastisol
130+ Shirts/hr water-based/discharge
51+ Shirts/hr DTG/digital white ink @ 3 min>

Electric: 240V, 1 Phase, 8900 Watts, 38 Amps
Production: 360+ Shirts/Hour* (Plastisol)
130+ Shirts/Hour* (Waterbased/Discharge)
51+ Shirts/Hour* (DTG/digital white ink @ 3min)
38 + Shirts/Hour* (DTG/digital white ink @ 4min)

Belt Width: 30"

Overall Dimensions: (L x W x H) 88" x 41" x 50"
Chamber Length: 41"
Chamber In-Feed Width: 33.5"
Chamber In-Feed Height: 2" - 7" (adjustable)
Heater Dimensions: (3) 12" x 24"

"X-Series" Conveyor Belt Tracking System with 30" wide PTFE coated belt
Infrared Focusing System: 2" - 7" belt-to-heater clearance, adjustable separately on each side for each heater

  • DC belt speed control
  • 3 Year Defect Warranty
  • 15 Year Heater Warranty

Additional Chamber (3) 2600W / 240V heaters
Belt Extensions (18" or 36")
Wheel set with locking casters for easy mobility

What is the Infrared Focusing System?

  • Infrared emitters have an optimal distance at which they operate most efficiently.
  • If the emitter is too far away energy is wasted and lost in the distance.
  • If the emitter is too close the substrate may come in contact with the emitter surface.
  • Adjusting the heater height is an absolute necessity if the products that you print vary in height.
  • Maintain an approximate distance of 2 1/2" from heater surface to ink.


Ships from Bethlehem, Pa. 18015 USA

Please allow 10 - 12 business days for production

Crating Fee - $599