Description
3801 Plastisol Foil Adhesive
- Clear plastisol adhesive used to produce brilliant metallic foil designs on textiles
- The adhesive can be printed directly onto the fabric and the foil applied to the dried adhesive. The adhesive can also be printed directly on the foil as a conventional transfer would be printed (mirror image)
- May be applied to light or dark fabrics
RECOMMENDED FABRICS
100% Cotton and some cotton/polyester blends. Always test print fabric before beginning a production run.
ADHESIVE APPLICATION
The 3801 Foil Adhesive should be printed right out of the container without any modifications. Stir adhesive prior to use.
SCREEN MESH
74 to 110 t/in or 30-43 t/cm Monofilament Any direct or indirect lacquer proof emulsion. Use 70 to 80-micron capillary film for the best results. Recommend: 86 to 110 t/in or 34-43 t/cm mesh for T-Shirts Recommend: 74 to 86 t/in or 30-34 t/cm mesh for sweatshirts
SQUEEGEE
65-70 Durometer: Sharp edge for light-colored fabrics and beveled or sharp edge for dark fabrics.
CURE TEMPERATURE
For directly printed fabrics: 325°F (163°C) entire ink film. For transfer printing (adhesive on foil): 240°F to 275°F (116°C to 135°C) Test dryer temperatures and wash test printed product before and during a production run.
CLEAN-UP
Mineral spirits or any environmentally friendly plastisol screen wash.
STORAGE OF INK
Recommend storage at 65°F to 90°F (18°C to 32°C). Avoid storage in CONTAINERS direct sunlight and moist, humid air. Keep containers well sealed.
Tech Sheet |
Safety Sheet |
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.