GR-70 INK DEGRADENT / STAIN REMOVER
Save time and money with an ink degradent that also removes stains, haze and ghosting.
GR-70 is a water soluble, non-caustic cleaner. It is highly effective on laquer ink, laquer stencil, vinyl, mylar, poster , UV and plastisol inks. As a haze remover, GR-70 is designed for the removal of cured ink stains. This product will not attack or damage the fabric.
SCREEN WASH / INK DEGRADENT
Card excessive ink from the screen. Spray or apply manually to the ink side of the screen. Scrub both sides of the screen with a non-abrasive brush or pad until the ink is liquefied. Starting at the bottom of the screen, high pressure water rinse all ink residue from the screen. By rinsing from bottom to top, you will prevent the possibility of any ink locking back into the mesh when it comes in contact with the rinse water. *Check with your local sanitation district regarding limitations on inks that are to be rinsed into the drain.
Remove the emulsion from the screen. Spray or apply manually to both sides of the screen. Scrub both sides of the screen with a non-abrasive brush or pad. Allow product to remain on the screen for a minimum of 3 minutes. Starting at the bottom of the screen, high pressure water rinse both sides of the screen.
|Tech Sheet||Safety Sheet|