LIQUID RENU-IT® LIQUID STAIN REMOVER - 4QT CASE

BUY IN 4X1QT CASE AND SAVE!

This product is a viscous de hazer and degreaser that is designed for the removal of cured stains on a variety of inks. LIQUID RENU-IT®cleans mesh of stains with less noticeable odor and works better than most hazardous stain removers.

1. Before using LIQUID RENU-IT®, remove all emulsion from the screen.
2. Brush product on the ink side of a wet or dry screen. Agitate on both sides of the screen with a non-abrasive brush or pad and set aside for approximately 3-30 minutes.
3. High-pressure water rinse, spraying from the top bottom to top, on the print side of the screen. Reverse screen and high-pressure rinse.
4. Allow the screen to dry.

AVAILABLE SIZES: 4QT CASE